Lighting Refurbishment
Recent mandates in the EU and UK mean that it will no longer be possible to purchase replacement fluorescent lamps in the near future. LEDs offer huge advantages over conventional lighting in terms of energy efficiency and longeveity.
Now is the right time to look at refurbishing old lighting installations to prevent disruption due to lack of new lamps and to take advantages of the considerable savings offered by LED.
RIDI offer a full service of from site survey to design, refurbishment, re-engineering or replacement, to installation. Contact us directly to discuss your needs.
Download the Free Refurbishment Lighting Guide
Why update your lighting installation?
Energy Saving
LED refurbishment products typically use 60% less energy than the lights they replace
Service
Life
Our products have a minimum 50,000hr life before replacement LED boards are required
Less Pollution
Reduced C02 emissions, no heavy metals, longer service, maintainable, simple to recycle
Better Light
Flicker free light, good colour rendering, and easy to control for a healthier and more productive working environment
Fluorescent lamps are being banned
The sale of the following types of fluorescent lamps will be banned in the EU and UK, starting in 2023.
Your existing stock of lamps may continue to be used, but it will not be possible to purchase any more after the phase out date.
Why update your lighting installation?
Energy Saving
LED refurbishment products typically use 60% less energy than the lights they replace
Service Life
Our products have a minimum 50,000hr life before replacement LED boards are required
Less Pollution
Reduced C02 emissions, no heavy metals, longer service, maintainable, simple to recycle
Light Quality
Flicker free light, good colour rendering, and easy to control for a healthier and more productive working environment
Fluorescent lamps are being banned
The sale of the following types of fluorescent lamps will be banned in the EU and UK, starting in 2023.
Your existing stock of lamps may continue to be used, but it will not be possible to purchase any more after the phase out date.
September 2023
T8 Tubes
February 2024
CFL Non-integrated
February 2024
T5 Tubes
February 2024
T5/T9 C 15mg Mercury
February 2025
T5 C 10mg Mercury
Discover the best refurbishment solution for your building
Re-Manufacture
We produce a light module that replaces the lamp and gear in your existing light fittings
- Retains the existing look
- Does not disturb the building fabric
- Least disruption during upgrade
Re-Engineer
We produce a replacement light fitting that exactly matches the dimensions of the exiting units and fits into the same ceiling system or construction
- New complete luminaire
- Retain existing ceiling systems
- Optics to match original design intent
Standard Replacement
We pick a product from our standard range that is able to replace the existing fittings without major building or electrical work
-
Standard fittings for most common ceiling types
-
Quick turnaorund
-
Cost effective
The Rowe, London | Find out more
Discover the best refurbishment solution for your building
Re-Manufacture
We produce a light
module that replaces the lamp and gear in your existing light fittings
- Retains the existing look
- Does not disturb the building fabric
- Least disruption during upgrade
Re-Engineer
We produce a replacement light fitting that exactly matches the dimensions of the exiting units and fits into the same ceiling system or construction
-
New complete luminaire
-
Retain existing ceiling systems
-
Optics to match original design intent
Standard Replacement
We pick a product from our standard range that is able to replace the existing fittings without major building or electrical work
-
Standard fittings for most common ceiling types
-
Quick turnaorund
-
Cost effective
Discover the best refurbishment solution for your building
Re-Manufacture
We produce a light module that replaces the lamp and gear in your existing light fittings
- Retains the existing look
- Does not disturb the building fabric
- Least disruption during upgrade
Re-Engineer
We produce a replacement light fitting that exactly matches the dimensions of the exiting units and fits into the same ceiling system or construction
- New complete luminaire
- Retain existing ceiling systems
- Optics to match original design intent
Standard Replacement
We pick a product from our standard range that is able to replace the existing fittings without major building or electrical work
- Standard fittings for most common ceiling types
- Quick turnaorund
- Cost effective
1
We’ll visit your building, and survey the existing lighting
2
Our experienced engineer will propose a lighting solution
3
We’ll produce a sample product for approval
4
We manufacture your products to meet all relevant standards
5
We support your products with our in house UK team
Contact us to arrange a site survey
1
We’ll visit your building and survey the existing lighting
2
Our experienced engineer will propose a lighting solution
3
We’ll produce a sample product for approval
4
We manufacture your products to meet all relevant standards
5
We support your products with our in house UK team
Let us know some of your details.
We will contact you to arrange a no obligation site survey of your lighting refurbishment project.
re-manufacture
Sometimes it’s practically impossible to remove and replace existing light fittings. Perhaps they are part of the building fabric or ceiling system, be of a custom design that fits in with the architecture of the space or in some cases may be listed items in historic buildings.
In these cases the best solution is to produce a retrofit lighting module that replaces the old technology with new LED units while retaining the character and form of the existing product.
Producing effective replacement lighting modules for existing luminaires can be complex and time-consuming. We have a rigorous process to ensure everyone is aware of the expectations and feasibility of the project.
LED retrofit modules last at least 50,000hrs compared to 15,000hrs for fluorescent lamps
The retrofitted luminaire maintains all electrical and mechanical safety certifications of the original product
LED retrofit geartrays typically save 50% energy compared to fluorescent
re-manufacture
Sometimes it’s practically impossible to remove and replace existing light fittings. Perhaps they are part of the building fabric or ceiling system, be of a custom design that fits in with the architecture of the space or in some cases may be listed items in historic buildings.
In these cases the best solution is to produce a retrofit lighting module that replaces the old technology with new LED units while retaining the character and form of the existing product.
Producing effective replacement lighting modules for existing luminaires can be complex and time-consuming. We have a rigorous process to ensure everyone is aware of the expectations and feasibility of the project.
LED re-manufactured geartrays typically save 50% energy compared to fluorescent
Long life LED modules means less maintenance going forward
Products are tuned to match the light output of the original fittings for a true 1:1 replacement
Survivor Rail Sector Lighting
Survivor is an impact resistant luminaire system which has been used extensively throughout the rail and underground networks in the UK and across Europe.
Following the acquisition of Selux interior products by RIDI Group, we produced a drop in replacement LED module which reduces power usage, simplifies maintenance and extends the lifetime of these fantastic light fittings for the foreseeable future.
Survivor Rail Sector Lighting
Survivor is an impact resistant luminaire system which has been used extensively throughout the rail and underground networks in the UK and across Europe.
Following the acquisition of Selux interior products by RIDI Group, we produced a drop in replacement LED module which reduces power usage, simplifies maintenance and extends the lifetime of these fantastic light fittings for the foreseeable future.
Re-engineer
When the existing luminaires are designed to fit into a special ceiling or structure, but not an integral part of the fabric of the building, it may be more cost effective and simpler to produce a new product that is a direct replacement.
RIDI Group production facilities are highly flexible and automated. We have an extensive range of LED modules and optics used in our series production luminaires. Because of this, we are well placed to produce specially designed replacement products accurately and cost-effectively.
Long life LED modules means less maintenance going forward
Products are tuned to match the light output of the original fittings for a true 1:1 replacement
LED retrofit geartrays typically save 50% energy compared to fluorescent
Re-engineer
When the existing luminaires are designed to fit into a special ceiling or structure, but not an integral part of the fabric of the building, it may be more cost effective and simpler to produce a new product that is a direct replacement.
RIDI Group production facilities are highly flexible and automated. We have an extensive range of LED modules and optics used in our series production luminaires. Because of this, we are well placed to produce specially designed replacement products accurately and cost-effectively.
LED retrofit geartrays typically save 50% energy compared to fluorescent
LED retrofit modules last at least 50,000hrs compared to 15,000hrs for fluorescent lamps
The retrofitted luminaire maintains all electrical and mechanical safety certifications of the original product
Great Minster House
Re-engineered Lighting
Working with MACE MEP and BW Interiors, RIDI created an energy efficient lighting scheme, tailored to meet the needs of modern working methods.
We created a specially sized tuneable white flat panel to directly replace the fluorescent fittings in the SAS150 concealed grid ceiling in the offices. Circulation areas, breakout areas and individual meeting rooms feature recessed and surface mounted downlighters from our standard range.
Great Minster House
Re-engineered Lighting
Working with MACE MEP and BW Interiors, RIDI created an energy efficient lighting scheme, tailored to meet the needs of modern working methods.
We created a specially sized tuneable white flat panel to directly replace the fluorescent fittings in the SAS150 concealed grid ceiling in the offices. Circulation areas, breakout areas and individual meeting rooms feature recessed and surface mounted downlighters from our standard range.
Standard replacement luminaires
In many cases where standard ceiling systems are used, and the luminaires can be easily replaced a standard product makes more sense from both a financial end environmental standpoint. Our series production luminaires are optimised for energy saving, efficient production and quick delivery.
As part of our commitment to reducing electrical waste, WEEE, we can provide a dedicated collection point on site for the old light fittings. They will be removed, separated into their component parts and recycled. This service is provided to our customers at no cost, and the existing luminaires do not need to have been supplied or produced by RIDI.
Our product portfolio contains a complete range of lights for any conceivable requirement, including products such as the SARA downlight which is specially designed to fit in existing ceiling cutouts regardless of the hole size.
Savings due to reduced energy use result in a payback time of < 5 years plus ongoing maintenance savings
Light output tailored to the
project to allow a 1:1 swap of fittings
and simple install process
Massive improvement in light quality. Brighter, better colour rendering and flicker free
Standard replacement luminaires
In many cases where standard ceiling systems are used, and the luminaires can be easily replaced a standard product makes more sense from both a financial end environmental standpoint. Our series production luminaires are optimised for energy saving, efficient production and quick delivery.
As part of our commitment to reducing electrical waste, WEEE, we can provide a dedicated collection point on site for the old light fittings. They will be removed, separated into their component parts and recycled. This service is provided to our customers at no cost, and the existing luminaires do not need to have been supplied or produced by RIDI.
Our product portfolio contains a complete range of lights for any conceivable requirement, including products such as the SARA downlight which is specially designed to fit in existing ceiling cutouts regardless of the hole size.
Massive improvement in light quality. Brighter, better colour rendering and flicker free
Savings due to reduced energy use result in a payback time of < 5 years plus ongoing maintenance savings
Light output tailored to the
project to allow a 1:1 swap of fittings
and simple install process
University of Bath
Tired and yellowing recessed light fittings in the science labs at the University of Bath resulted in a dingy and oppressive learning and working environment for students, researchers and teaching staff alike. RIDI ARKTIK LED and FPL panel luminaires were chosen and installed as a straight swap.
While the dramatic improvement the quality of light and general working environment was the primary motivator for the refurbishment, energy usage was also a factor. Replacing the 4x18W T8 fittings with ATKTIK LED resulted an energy reduction of over 50%. Furthermore, the increase in lifetime and RIDI’s guarantee to have spare parts available for at least 10 years means that substantial maintenance costs will be avoided, increasing the University’s savings.
University of Bath
Tired and yellowing recessed light fittings in the science labs at the University of Bath resulted in a dingy and oppressive learning and working environment for students, researchers and teaching staff alike. RIDI ARKTIK LED and FPL panel luminaires were chosen and installed as a straight swap.
While the dramatic improvement the quality of light and general working environment was the primary motivator for the refurbishment, energy usage was also a factor. Replacing the 4x18W T8 fittings with ATKTIK LED resulted an energy reduction of over 50%. Furthermore, the increase in lifetime and RIDI’s guarantee to have spare parts available for at least 10 years means that substantial maintenance costs will be avoided, increasing the University’s savings.
Standard luminaires suitable for refurbishment projects
EDLR-E2
F-Line
FPL
LINIA
PFLO
SARA
VL1GL
VL1GW
VLG-FS
refurbishment projects
Department for Transport—Great Minster House
Modular Recessed Multilens
